Instruction manual

49
Following is a brief description for each item and its specific operations:
 Baud Rate – press +/- buttons to change the value.
 Data Bit – press
+/-
buttons to change the value.
 Stop Bit – press +/- buttons to change the value.
 Parity – (Odd, Even, or None). Press +/- buttons to change the value.
6.10 Network Setup
In Setup Menu display, press ▲▼ to change the highlighted option to Network and then
press ENTER to call up Network Setup as shown.
The Network Setup allows the administrator to setup all Ethernet network related parameters.
Please check with your network administrator to set these parameters correctly.
The general operations are as below:
 ▲▼◄►
Press these buttons to select the items.
 ESC
Press this button to escape from this screen and return to Setup Menu display. If the Save
dialog is shown, press ENTER to exit and save, ESC to exit without saving.
Following is a brief description for each item and its specific operations:
 Net Type – Static IP, PPPoE or DHCP. DHCP can only be used for intranet (LAN) access,
while Static IP and PPPoE can be used for both internet & intranet access. Press +/-
buttons to change the Net Type.
 IP Address – Ethernet IP address for the system. To get the static IP address, please
contact your local ISP (Internet Service Provider). Please follow the Text Input method
described in Section 4.1 to modify these items.