Instruction manual

47
6.8 System Setup
In Setup Menu display, press ▲▼ to change the highlighted option to System and then press
ENTER to call up System Setup as shown.
The System Setup allows the administrator to set the system time, time zone, time
synchronization, language, etc.
The general operations are as below:
 ▲▼◄►
Press these buttons to select the items.
 ESC
Press this button to escape from this screen and return to Setup Menu display. If the Save
dialog is shown, press ENTER to exit and save, ESC to exit without saving. Please
note that if the selected language is changed, the user will be asked to reboot the
system for the newly selected language to take effect.
Following is a brief description for each item and its specific operations:

Time Zone – press +/- buttons to select the time zone for the system.
 Daylight Saving Time – press ENTER to check/uncheck this item. The default value is
set by selecting a different time zone, but the user may check/uncheck this item if the
default setting is checked.
 System Time
 Synchronization – time synchronized with TSP Server or not. Press ENTER to
check/uncheck this item. The default setting is “–
––
–” - unchecked.