Instruction manual

The Password Setup allows the administrator to add new users, delete existing ones and/or

modify the user’s name, password and/or level.

There are three password levels in the system, including Administrator (highest),

Supervisor and Operator (lowest). The Operator can operate live video display, the

Supervisor live video display, image playback and archive and the Administrator everything.

The system allows up to 18 user accounts.

There is one factory-preset login name (aa) and password (11) at Administrator level. The

user can use it to login the system for the first time.

The general operations are as below:

 ▲▼◄►

Press these buttons to select the items. The display will scroll up/down if the selected item

is not shown on the screen.



MODE

=> Select/Deselect as default

Press this button to select this user as the default one at login or deselect if this user is the

default login user. An asterisk (*) will be shown preceding the number for the default

is shown, so the user doesn’t need to enter the text to login the system.

 ESC

Press this button to escape from this screen and return to Setup Menu display. If the Save

dialog is shown, press ENTER to exit and save, ESC to exit without saving.

Following is a brief description for each item and its specific operations:

 Login Name – please follow the Text Input method described in Section 4.1 to modify

this item.



Password

– this item accepts numbers only. Please follow the Text Input method

described in Section 4.1 to modify this item.

 Level – the password level (Administrator, Supervisor, or Operator) for this user.

Press +/- buttons to change the level.