Instruction manual

25
5.5 Backup Device
In Menu display, press ▲▼ to change the highlighted option to Backup Device and then
press ENTER to call up Backup Device display as shown below.
The system supports a variety of USB 2.0 storage devices, including Storage Disk such as
USB 2.0 storage disk drives and DVD Disc (including DVD+RW, DVD+R, and DVD-R)
(DVD-RW is not supported). The operations are as below:
 ▲▼◄►
Press these buttons to select the items.
 ESC
Press this button to escape from this screen and return to previous display.
 Connect/Disconnect – If the specific backup device is disconnected (as shown in Current
Status), please plug the USB device in one of the USB ports of the system and/or insert a
DVD for DVD device and then press ENTER to command the system to connect with the
device. If the specific device is already connected (EX. Read/write, as shown in Current
Status), please press ENTER to command the system software to disconnect with the
device and then unplug the backup device from the backup port.
Note 1: Please DO NOT format the DVD disc for better performance and compatibility.
Note 2: Before using USB pen drive, please format it to FAT32 file system by
MS-Windows.
Note 3: The backup device has to be connected by the system software before it can be
used to read/write.
Note 4: Some backup devices may have compatibility problems. Please contact your
local dealer or installer for the supported devices.
 Backup
Press ENTER when this item is selected to backup the configurations of this unit to the
corresponding USB device.