Installation guide

43
empty, the filenames will be “cam..”; if not, the filenames will be “Prefix-cam..”. For
example, if the prefix is “DVR01”, then the filenames will be “DVR01-cam..”.
Advanced Network Setup:
In Network Setup, press ENTER to call up Advanced Network Setup as shown when the
highlighted option is Advancing function.
The Advanced Network Setup allows the administrator to set advanced network parameters.
If the user is not familiar with network administration, please DO NOT modify the items in this
dialog. The general operations are as below:
Direct Control
Press these buttons to select the items.
MENU/ESC
Press this button to escape from this screen, and return to Network Setup display. If the Save
dialog is shown, press ENTER to exit and save, MENU/ESC to exit without saving.
Following is a brief description for each item and its specific operations:
 Control Port – the control port for remote access. The default value is 67.
 Data Port – the data port for remote access. The default value is 68.
 HTTP Port – the HTTP (web page) port for remote access. The default value is 80.