Installation guide

41
MENU/ESC
Press this button to escape from this screen, and return to Network Setup display. If the Save
dialog is shown, press ENTER to exit and save, MENU/ESC to exit without saving.
Following is a brief description for each item and its specific operations:
 SMTP Server – SMTP mail server name.
 SMTP Port – the SMTP port for e-mail transmission. The default value is 25.
 Authentication – whether the SMTP mail server requires authentication. Press ENTER
or +/- to check/uncheck this item.
 Username – username if the SMTP mail server requires authentication.
 Password – password if the SMTP mail server requires authentication.
 Mail From – the e-mail address of this DVR unit, i.e. the sender of the e-mails originated
from the triggered events.
 Mail To #1-5 – the receivers’ e-mail addresses. The system can send the e-mails
originated from the triggered events to up to 5 different receivers.