Installation guide

39
10. Set up the “Hostname” and “IP Address” by yourself. You can enter your favor domain
name to “Hostname”, and input correct “IP address” to IP Address. Finally, click the “Add
Host” to finish the setting.
11. The DDNS information will display on the webpage in the end.
12. Please try to connect to the DVR through domain name.
13. If you cannot connect the DVR through domain name, you can test the DDNS service on
your PC.
14. Please open the “command mode” from “Start Menu”.
15. Input the command: c:\>ping xxxxx.dyndns.org [ENTER].
NOTE
：
：：
： The “xxxxx” is your domain name.