Installation guide

14
7. Function Control Illustration
The Chapter will explain How to use the function of panel button. Please follow the
illustration item as below:
MENU/ESC Button:
In the MONITOR mode, press the button to change the viewing mode to the Menu. The
“SETTING” mode offers 10 kinds of sub-mode. Please select the sub-mode through the
“Control” button. The default selection is “Log In/Out”.
In the SETTING mode, the button function will change to ESC function. If you press the button
in the “SETTING” mode, then will go back to the MONITOR mode. The DVR will record all
modification automatically.
MODE :
In the MONITOR mode, press this button to select between live mode and playback mode. In
some dialogs, this button is used as a miscellaneous function key.
SEQ :
In the MONITOR or PLAYBACK mode, the monitor will go into the full screen auto switch; the
default time is 2 seconds. Found on the chapter of “AUTOSEQ SET”.
QUAD/CALL:
In the PLAYBACK mode, press this button to switch to “Quad” display or return from full screen
display of the focus camera. In some dialogs, this button is used as a miscellaneous function
key.
In MONITOR mode, press this button to enter/exit PTZ Control mode function. In the other
displays, press this button to escape to the upper level display.
+
++
+
In MONITOR or PLAYBACK mode, press these buttons to add the volume.