User manual

Pleiades - Taurus User Guide
The aluminium
stand does not have
to be removed for
drive assembly.
For RAID 0,
identical hard drives
are recommended
(same manufacturer,
capacity and RPM)
Chapter 2 - Hard Drive Assembly
Your unit may come with a pre-installed hard drive. Before
opening such an enclosure, please read the warranty and any
other notes from your vendor carefully before doing so, as this
could void your warranty.
1. Remove the four screws at the bottom of the case.
2. Push the inner enclosure out, and remove the outer chassis.
3. Install the first hard drive and mount it with two screws on
each side.
- 4 -