User manual

Please read your
warranty carefully,
as this may vary
between different
vendors!
Chapter 6 - Appendix
Technical Questions
For RMA and other questions, please contact your vendor or
check out their online support area!
If you lose your device ID number, please write down the serial
number and contact your vendor.
For NDAS mode, the drivers need to be loaded on each
computer that wants access to the NDAS device. However, if
you are using Windows Sharing, only one computer needs the
software installed. The other computers will not need it.
To disconnect the NDAS disk, we always recommend using the
option in your Device Management (Device Utility for Mac) if
connected via Ethernet. You can use the ‘Unplug or Eject
Hardware” icon in your taskbar (Eject for Mac) to stop the disk
before disconnecting it from the Device Management. Close all
windows that may be accessing the NDAS device.
Fan Setting
There are 3 modes available for you to select the desired
cooling. Automatic (Auto), Manual Low (M/L), Manual High
(M/H).
We recommend you leave your unit on the Auto setting. When
this mode is selected, the M9-NDAS automatically adjusts the
fan speed up and down as necessary to keep the HDD cool.
- 18 -