User manual

USER MANUAL
M9-SATA USB/LAN
Remember to
enable the FTP
service on the
Status page when
you plan on using
the FTP server.
When you change
the port number for
the FTP server
remember to adjust
your firewall, or
otherwise the FTP
access will most
likely be blocked.
,
If the anonymous
FTP account
to a shared folder
is set
with password
protected access,
the passwo
inef
directory can be
rd will be
fective and the
accessed via FTP.
4.2.5 FTP Server
When creating FTP accounts only use the English alphabet
and no special characters or spaces.
TP
ort
sing the default of 21.
n FTP user to login
without username or password. For security reasons, it’s
best to keep this disabled.
If you like to grant FTP access to an anonymous user, set it
to Enable. Decide if that user will have read only or read &
write access and select the home directory for the
anonymous user. Click on Apply to save the new settings.
1. To add a new account, click on Add.
• FTP Server Configuration: The standard port for the F
service is 21. If required, you can change it and use any p
number from 1025-65500 but in general, we recommend
u
• Allow Anonymous: This will allow a
Page 20 / Chapter 4 - LAN Disk Setup