User manual

USER MANUAL
M9-SATA USB/LAN
The date and time
s turned
n.
If SNTP is disabled
and you turn off or
nd
et
settings are only
accurate as long as
the power i
o
remove the power
supply, the date a
time have to be s
again!
If SNTP is set to
Auto and a time
server is selected, it
will automatically
synchronise the
time at boot up.
If the encoding
does not match the
nguage of your
files, the transfer
can not be
completed and file
names may be
corrupted.
he account used to manage the
ot
e
password as soon as you have logged in for the first time, to
rd, click OK to apply
it and you will be asked to login again with your new
password.
la
• Administrator: This is t
settings of your network drive. The admin user name can n
be changed but we strongly recommend changing th
prevent any unauthorised access.
Click on Change, enter your new passwo
• Date/Time: Click on Change to setup the correct date and
time. By default, SNTP is disabled, so you can enter the date
and time manually, then click OK to save the settings.
If internet access is available, we recommend setting SNTP
to AUTO instead. Select a time server from the list, choose
your time zone and if necessary select the option for daylight
savings. Click OK to apply the new settings and it will
automatically synchronise date & time with the time server.
• Language: By default, the encoding is set to English. If you
want to store or transfer files with a different encoding
(different language), choose the corresponding language
from the drop down list. Click on Help for further details.
it is important
that you select the correct language!
In order to transfer and view the files correctly,
Page 13 / Chapter 4 - LAN Disk Setup