User manual

Taurus - RAID User Guide
The aluminium
stand does not
have to be removed
for drive assembly.
For RAID 0 and
RAID 1, identical
hard drives are
recommended
(same manufacturer,
capacity and RPM)
Chapter 2 - Hard Drive Assembly
Your unit may come with a pre-installed hard drive. Before
opening such an enclosure, please read the warranty from your
vendor carefully, as this could void your warranty.
Taurus RAID
1. Remove the four screws at the bottom of the case.
2. Push the inner enclosure out, and remove the outer chassis.
3. Install the first hard drive and mount it with two screws on
each side.
Page 5 / Chapter 2 - HDD Assembly