Installation Guide

C. Installing mac LEDS SNAP flatLOfixture
1) Fixtures mount by affixing the included bracket with screw. Thefixtures can be mounted in an enclosed
area using any orientation necessary for proper productillumination. Consult professionals and
state/local codes to confirm size and type of hardware tosecure the fixture properly to the mounting
surface (see Figure 5).
Figure 5:
D. Making Electrical Connections
If you wish to hard wire the power supply direct to the AC mains, have a qualified electrician connect the line voltage to the
input side of the power supply in accordance with national, state and local electrical codes using an appropriate junction box
(not included).
1) Isolate from the mains supply before installation
2) Wire the LED fixture onto the DC output of the driver using the pigtail.
RED= positive
BLACK= negative
3) Wire the input to AC 120 line/mains
WHITE- neutral
BLACK= line or hot
OR
BLUE= neutral
BROWN= line or hot
4) A standard TRIAC dimmer may be used on the AC/line side if a dimmable driver has been used.
Limited Warranty
Mac LEDS (the “Manufacturer”) warrants to the original buyer, with proof of purchase, (the “Buyer”) that each product manufactured and sold by Manufacturer (the “Product”) will be free
from defects in the material and workmanship in its intended use (normal wear and tear excepted).This warranty covers Manufacturer’s LED components operated on Manufacturer power
supplies for a period of THREE YEARS from (the invoice date) from Manufacturer. This warranty does not cover damage caused by tampering with or unauthorized use of or abnormal stress
of the product. Unauthorized use or abnormal use or stress includes operation or use of the product in an operating environment that exceeds the limitations specified in the
Manufacturer’s specifications. This warranty applies to the Buyer. If you have any questions or concerns, please contact mac LEDS:
For installation assistance or additional parts please contact:
[e-mail]
P) 888.908.3521