Specifications

DigiRack Plug-ins Guide78
VENUE Provides Peak metering behavior with a
meter scale calibrated specifically for Digidesign
VENUE systems. Reference calibration (0 dB) is
–20 dBFS.
Meter Peak Hold Options
Each of the SignalTools plug-ins lets you choose
the style of peak hold when peaks are shown in
the plug-in meters.
3 Sec Hold Displays peak levels for 3 seconds
Inf Hold Displays peak levels until meters are
cleared
No Hold Does not display peak levels
Reference Mark Options
Each SignalTools meter type lets you adjust the
level of the reference mark on the side of the
meter display. The mark is set by default to the
reference level for the corresponding meter
type.
To change the reference level of a SignalTools
meter:
 Drag the reference mark to a different location
on the meter scale.
Meter values are always displayed on con-
trol surfaces in dBFS values, regardless of
the Meter Type setting.
SignalTools meters also change color to
show different ranges of level. The relative
range of color automatically adjusts to fol-
low the current Reference Mark setting in all
meter types (except Peak+RMS).