Specifications

Chapter 3: DigiRack D-Fx Plug-ins 11
The range of the Low-Pass Filter is 20 Hz to
19.86 kHz, with a maximum value of Off (which
effectively means bypass).
Feedback Controls the amount of feedback ap-
plied from the output of the delay into its input.
It also controls the number of repetitions of the
delayed signal.
Cross-Feedback Cross-Feedback feeds the de-
layed signals to their opposite channel: The left
channel delay is fed to the right channel input
and vice-versa. The result is a stereo echo that
ping-pongs back and forth between the right
and left channels.
Selecting Audio for
AudioSuite Delay Processing
Because delays add additional material to the
end of selected audio (a delay tap), make a selec-
tion that is longer than the original source ma-
terial so AudioSuite can write the additional de-
layed audio to the audio file.
Selecting only the original material, without
leaving additional space at the end results in the
delayed audio being cutoff at the end of the se-
lection. To accommodate delayed audio that
comes after the source audio, place the region in
a track, and select the desired audio plus an
amount of blank space at the end of the region
equal to the amount of delay that you have
added in the plug-in. The plug-in will then have
space at the end of the region in which to write
the final delay.