Specifications

DigiRack Plug-ins Guide10
Gain Provides individual control of the input
level for each of the four delay lines (or “taps”).
Individually adjust the Gain for each of the four
taps, either to prevent clipping or to increase the
level of the processed signal.
Selecting the Sum Inputs button sums the dry
input signals (mono or stereo) before processing
them. The dry signal then appears in the center
of the stereo field and the wet, effected signal
will be output in stereo.
Feedback Provides individual control over the
amount of feedback applied from the output of
the delay into its input for each tap. It also con-
trols the number of repetitions of the delayed
signal. For the feedback feature to function, the
Gain slider for that tap must be raised above its
lowest setting.
Pan Provides individual control over the appar-
ent location of each of the four taps in the stereo
field.
Delay Sets the delay time between the original
signal and the delayed signal. The higher the
setting, the longer the delay. This control is ad-
justable from 0–1500 milliseconds (1.5 seconds).
Mix Adjusts the balance between the effected
signal and the original signal and controls the
depth of the effect. Mix is adjustable from 0% to
100%.
Ping-Pong Delay
(AudioSuite Only)
The Ping-Pong Delay plug-in adds a controllable
delay to the original audio signal. Use the Ping-
Pong delay to add spatialization, and panned
echo to audio material. This plug-in feeds back
delayed signals to their opposite channels, creat-
ing a characteristic ping-pong echo effect.
Gain Adjusts the input volume of the Ping-Pong
Delay to prevent clipping or to increase the level
of the processed signal.
Mix Adjusts the balance between the effected
signal and the original signal and controls the
depth of the effect. Mix is adjustable from 0% to
100%.
Delay Sets the delay time between the original
signal and the delayed signal. The higher the
setting, the longer the delay. This control is ad-
justable from 0–1500 milliseconds (1.5 seconds).
Low-Pass Filter Controls the cutoff frequency of
the low-pass filter. Use this to attenuate the high
frequency content of the feedback signal. The
lower the setting, the more high frequencies are
removed from the feedback signal.
Ping-Pong Delay plug-in
The Ping-Pong Delay plug-in was formerly
called D-fx Ping-Pong Delay. It is fully com-
patible with all settings and presets created
for D-fx Ping-Pong Delay.