Installation manual

Euphonix System 5 Hybrid Pilot Operation Manual Console/Workstation Operations
26
8. Repeat the process to add up to four controllers.
9. When finished adding controllers, click the OK button to close the dialog in
Final Cut Pro. In Soundtrack, click the Close button at the top left to close the
Preferences.
10. Restart the application or computer if initial communication is not achieved.
The Hybrid connects and updates with new track information.
2.8 DAD AX24 Microphone Preamplifier
Figure 2-9 DAD AX24 mic preamp
The DAD AX24 is a high-end EuCon-ized mic preamp from Digital Audio Denmark.
The AX24’s parameters can be controlled from the Hybrid surface, including: Mic/Line
switching, Preamp Gain, Phantom On/Off, Phase, Mute, Channel Delay and Mono/Ste-
reo linking. The AX24 must be connected to the workstation computer via USB link
(available from DAD).
To enable EuCon in the DADMan software:
1. Open the DADMan Software on your workstation
2. Initiate USB communication with the device from the list of devices on the left
of the DADMan window.
3. Enable Eucon Controls from the File menu.
4. When the DADMan software is the focused application, its controls are dis-
played on the Input Knobset on the Hybrid surface.