User Guide

Remote 48
8
Numbered Locates
In addition to the transport locate point, there
are four numbered
LOCATE points to give you
quick access to frequently used locations in
your Project. Press one of the four numbered
LOCATE buttons to jump to a Locate point.
Numbered Locates are set using the store
function (see
AUTOLOCATOR ).
Shuttle and Jog
Both shuttle and jog allow you to play audio
both forwards and backwards at non real-time
speeds. Shuttle play speed is quantized to 1/32,
1/16, 1/8, 1/4, 1/2, 1, and 2x the normal play
speed, and is proportional to how far the Wheel
is rotated after
SHUTTLE is engaged. JOG is
similar to shuttle, except that the play speed
varies continuously between 0x and 1x and is
proportional to how fast you rotate the wheel.
Both give you very precise control of the
transport position for cueing to edit points.
Pressing
SHUTTLE or JOG engages Shuttle/Jog,
and pressing any transport button except
Record disengages Shuttle/Jog. With either
SHUTTLE or JOG engaged, rotating the wheel
counterclockwise produces reverse transport movement, and clockwise produces
forward movement. When the transport is not moving, the Play LED blinks; when
the transport is moving, the Play LED glows and the Fast Forward or Rewind
LED blinks to indicate the playback direction.
Shuttle and Jog Wheel
In addition to its use as a Shuttle/Jog controller, the wheel is used for data entry
in certain autolocator operations, such as scrolling through the cue list or
changing time values in edit time operations. Data entry mode is overridden
whenever
SHUTTLE or JOG is enabled. See AUTOLOCATOR for specific uses of
the wheel in date entry mode.
SHUTTLE JOG
Note: Shuttle must be disabled to enter Record.
Operation
LOCATE LOCATE
1
234