User guide

Tracktion 4 Reference Manual
86
Enable/Disable all other send/return lters on this bus: Both the send and return lters have but-
tons to globally enable or disable other send / return lters that are assigned to the same bus as the
current one.
The ReWire Filter
ReWire is a technology by which complete audio applications, such as sequencers, can easily be
slaved to other such programs running on the same computer. Tracktion is capable of acting as a Re-
Wire master, which means that any software that can be set to run as a ReWire slave can be used as
an instrument inside Tracktion (for example Propellerhead Software’s Reason and Submersible’s Drum-
Core applications).
To use ReWire you need to enable the ReWire option in the Tracktion settings. See Chapter 2.4 for
details on enabling ReWire devices.
ReWire devices are added to tracks in just the same way as any other lter.
Once a ReWire device has been added to a track, it is necessary to do perform a
few simple steps to use a ReWire slaved application:
Click the ReWire lter in the lter section (Fig. 3.4.20). The properties will be
shown in the properties panel (Fig. 3.4.21).
Click on the “choose device” button. A pop-up menu will be shown that lists all available ReWire
slave applications installed on your computer. If this list is empty, you either have no ReWire applica-
tions installed, or they are not installed correctly.
Figure 3.4.19
Figure 3.4.20
Figure 3.4.21