Owner`s manual

Mackie TT24 Digital Live Console Owner’s Manual Addendum v1.5

Console Mode

To conﬁgure each console as master or slave, push the SETUP button and select OPERATION.

CONSOLE MODE allows you to select either MASTER or SLAVE for the console.

Note: One console must be designated MASTER and one console must be designated SLAVE

in order for console linking to operate properly. Once you have conﬁgured the consoles, they

will remain in that conﬁguration until you change them using the CONSOLE MODE selection.

If you disconnect the console designated as the SLAVE, you must change it back to MASTER

in order for it to operate properly on its own.

In order for TT Control to work correctly, it must be assigned the same Master/Slave status as

the console to which it is connected. From the TT Control application, click the Screen Name

drop-down box and select Console Mode. Select the console mode that corresponds to the

TT24 your computer is connected to. Note that MASTER or SLAVE appears in the title bar.