Owner`s manual

Mackie TT24 Digital Live Console Owner’s Manual Addendum v1.5

4. U100 Network Card Implementation

Manual Section: Add 6.13.5 Expansion

Feature Description: The U100 network card enables the TT24 to communicate with

external devices, including a second TT24 and the DS3232 Digital Snake, using a standard

Cat5 cable.

U-NET

U100

NETWORK CARD

There are two indicating LEDs on the U100 network card. The green LED ( Q ) lights as soon

as communication is established with another device and indicates that it has successfully

joined the network. The red LED ( ! ) lights if an error is detected anywhere on the network.

Note: Make sure the TT24 has been updated with the latest ﬁrmware. After updating the

TT24, install the U100 network card and make sure the U100 card has been updated with the

latest ﬁrmware. Go to our website to get the latest ﬁrmware and software downloads:

http://www.mackie.com/products/tt24/software.html

Note: When updating a console or card, make sure the console is conﬁgured as a “Master”

(see “Console Mode” on next page) during the update procedure.

4.1 U-NET

U-NET is LOUD Technologies’ audio system networking solution. Current audio networks

have limitations that hindered implementing some of our ideas and concepts, so we developed

our own audio distribution and control network that does everything we needed it to do

and more. You will see more products from the LOUD Technologies family with the U-NET

connection, enabling them to be connected and take advantage of a uniﬁed system of audio

distribution and control.

Refer to the “Ubiquity Networking Whitepaper” for more information about this subject.

http://www.eaw.com/APP/papers.html