User Manual

DLM8/12 Powered Loudspeakers
8
DLM8/12 Powered Loudspeakers
Daisy-Chaining Multiple DLM Loudspeakers
R
L
Line
Mic
Ch 1
Mix
1 THRU2
TRS =
TRS = Line
XLR
MEMSYS21
R
L
Line
Mic
Ch 1
Mix
1 THRU2
TRS =
TRS = Line
XLR
MEMSYS21
2000W Digital Loudspeaker
R
L
Line
Mic
Ch 1
Mix
1 THRU2
TRS =
TRS = Line
XLR
MEMSYS21
R
L
Line
Mic
Ch 1
Mix
1 THRU2
TRS =
TRS = Line
XLR
MEMSYS21
/
2000W Digital Loudspeaker
/
2000W Digital Loudspeaker
/
2000W Digital Loudspeaker
/
DL1608 Mixer
To next DLM
loudspeaker
input
To next DLM
loudspeaker
input
Main
Outs
Hookup Diagrams continued...
DLM loudspeakers may be daisy-chained via the male XLR connector labeled “THRU”. Simply plug the
signal source (i.e., mixer output) into the input jack(s), and patch that loudspeaker’s THRU jack to the next
loudspeaker’s input jack, and so on, daisy-chaining multiple DLM loudspeakers. See above for a visual
representation of daisy-chaining.
The THRU jack on DLM loudspeakers are fully buffered with 100
balanced output impedance
drivers, so there is no additional loading to the inputs when daisy-chaining. In other words, you
could conceivably daisy-chain DLM loudspeakers indefinitely. If you do that, we want pictures!