DLM8 and DLM12 2000W Powered Loudspeakers with DL2 Digital Mixer OWNER’S MANUAL
DLM8/12 Powered Loudspeakers Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Features Important Safety Instructions................................... 2 Contents.................................................................. 3 Features.................................................................. 3 Introduction............................................................. 4 How To Use This Manual.......................................... 4 Getting Started........................................................ 4 Things To Remember..............................................
DLM8/12 Powered Loudspeakers Introduction Getting Started The Mackie DLM8 and DLM12 each deliver 2000 watts into the most compact, professional portable loudspeaker design ever. Featuring TruSource™ technology, the DLM loudspeakers are equipped with Mackie’s TruSource driver that incorporates the high-output 8" [DLM8] and 12" [DLM12] woofer and 1.75" compression driver into an incredibly compact common-magnet design.
2000W Digital Loudspeaker AUX BASS +2 TREBLE +2 LEVEL 1 2 SYS MEM XLR Line Mic Ch 1 Mix TRS = Line TRS = R L 1 2 THRU POWER THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES FOR THE U.S. AND ICES-003, FOR CANADA. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
DLM8/12 Powered Loudspeakers Hookup Diagrams continued... 2000W Digital Loudspeaker AUX 1 2000W Digital Loudspeaker AUX BASS +2 TREBLE +2 LEVEL 2 SYS 1 XLR Line Mic 2 SYS MEM XLR Line Mic Ch 1 Mix TRS = Line BASS +2 TREBLE +2 LEVEL MEM TRS = Ch 1 Mix TRS = Line TRS = R R L 1 2 L THRU 1 POWER THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES FOR THE U.S. AND ICES-003, FOR CANADA.
2000W Digital Loudspeaker AUX 1 2000W Digital Loudspeaker AUX BASS +2 TREBLE +2 LEVEL 2 SYS 1 XLR Line Mic 2 SYS MEM XLR Line Mic Ch 1 Mix TRS = TRS = Line BASS +2 TREBLE +2 LEVEL MEM Ch 1 Mix TRS = TRS = Line R R L 1 L 2 THRU 1 POWER 2 THRU POWER THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES FOR THE U.S. AND ICES-003, FOR CANADA.
DLM8/12 Powered Loudspeakers Hookup Diagrams continued...
Owner’s Manual Hookup Diagrams continued... 2000W Digital Loudspeaker AUX 1 2000W Digital Loudspeaker AUX BASS +2 TREBLE +2 LEVEL 2 SYS 1 XLR Line Mic 2 SYS TRS = 1 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES FOR THE U.S. AND ICES-003, FOR CANADA. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
DLM8/12 Powered Loudspeakers DLM8/12 Loudspeaker: Rear Panel Features / 2000W Digital Loudspeaker AUX BASS +2 TREBLE +2 LEVEL 12 1 15 2 SYS MEM 11 13 14 17 POWER 2000W 2W XLR Line Mic TRS = Line 6 10 16 Ch 1 Mix TRS = R 5 1 7 8 L 2 9 THRU POWER 2 100 - 240V 50 - 60Hz 250W 3 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES FOR THE U.S. AND ICES-003, FOR CANADA.
Owner’s Manual DLM8/12 Loudspeaker: Rear Panel Features continued... / 2000W Digital Loudspeaker AUX BASS +2 TREBLE +2 LEVEL 1 12 2 SYS 11 POWER 2000W 2W 17 XLR Line Mic TRS = Line 10 15 MEM 13 14 16 Ch 1 Mix 6 TRS = 9 R 5 1 7 8 L 2 THRU 5. XLR and 1/4" Combo Inputs 8. Thru Output Channel 1 may accept a mic or line-level signal via XLR or line-level signal via TRS 1/4" cable. Be aware of the position of the mic/line switch [6].
DLM8/12 Powered Loudspeakers DLM8/12 Loudspeaker: Rear Panel Features continued... 11. Channel 1 and 2 Buttons Press the Channel 1 or 2 button repeatedly until the parameter you want to change (for that channel) is highlighted: • • • • • Level Low Mid High FX Send [Reverb, Chorus, Delay] Once the parameter you want to change is highlighted, press the + or – button [16] repeatedly until you have achieved the perfect parameter value.
. SYS Button DLM loudspeakers have powerful system processing tools built in. Simply press the system [SYS] button repeatedly until the parameter you want to change is highlighted: • • • • EQ Delay FX Feedback Once the parameter you want to change is highlighted, press the + or – button [16] repeatedly until you have achieved the setting you want for the loudspeaker system.
DLM8/12 Powered Loudspeakers DLM8/12 Loudspeaker: Rear Panel Features continued... 14. MEM Button 16. + and – Buttons Settings for DLM loudspeakers may be saved to memory and recalled at a later time by utilizing the memory [MEM] button. These buttons work in conjunction with the buttons mentioned previously: channel 1 and 2, MEM and SYS.
There are advanced DSP protection mechanisms designed into the DLM8/12 to safeguard the loudspeakers and amplifiers from inadvertent damage. The protection circuits are designed to protect the loudspeakers under reasonable and sensible conditions. Should you choose to ignore the warning signs [e.g. excessive distortion], you can still damage the speaker by overdriving it past the point of amplifier clipping. Such damage is beyond the scope of the warranty.
DLM8/12 Powered Loudspeakers Placement Room Acoustics WARNING: Installation should only be done by an experienced technician. Improper installation may result in damage to the equipment, injury or death. Make sure that the loudspeaker is installed in a stable and secure way in order to avoid any conditions that may be dangerous for persons or structures. Room acoustics play a crucial role in the overall performance of a sound system.
Rigging Hardware and Accessories DLM loudspeakers may be individually flown using M10 x 17 mm forged shoulder eyebolts. Rigging Mackie loudspeakers will invariably require hardware not supplied by Mackie. Various types of load-rated hardware are available from a variety of third-party sources. There are a number of such companies specializing in manufacturing hardware for, designing, and installing rigging systems. Each one of these tasks is a discipline in its own right.
DLM8/12 Powered Loudspeakers Important Rigging Reminder: To reiterate, Mackie is not in the business of providing complete rigging systems, either as designers, manufacturers, or installers. It is the responsibility of the installer to provide a properly engineered, load-certified rigging system for supporting the loudspeaker from structure.
If you think your Mackie product has a problem, please check out the following troubleshooting tips and do your best to confirm the problem. Visit the Support section of our website (www.mackie.com/support) where you will find lots of useful information such as FAQs and other documentation. You may find the answer to the problem without having to send your Mackie product away. Troubleshooting No power • Our favorite question: Is it plugged in? Make sure the AC outlet is live [check with a tester or lamp].
DLM8/12 Powered Loudspeakers 20 Repair For warranty service, refer to the warranty information on page 28. Non-warranty service for Mackie products is available at a factory-authorized service center. To locate the nearest service center, visit www.mackie.com, click “Support” and select “Locate a Service Center.” Service for Mackie products living outside the United States can be obtained through local dealers or distributors.
XLR Connectors 1/4" TRS Connectors Each DLM loudspeaker has two female XLR/TRS combo inputs. Be sure the cables are wired per AES (Audio Engineering Society) standards: TRS stands for Tip-Ring-Sleeve, the three connections available on a stereo 1/4" cable. This allows for a direct connection to the channel 1 and 2 input jacks on DLM loudspeakers. Hi-Z instruments – guitar, for example – may be connected directly to the channel 2 input without needing a DI box.
DLM8/12 Powered Loudspeakers Appendix C: Technical Information DLM Loudspeaker Specifications Acoustic Performance: Frequency Response (-10 dB) Power Amplifiers 65 Hz – 20 kHz [DLM8] System Power Amplification 38 Hz – 20 kHz [DLM12] Max peak SPL (@ 1m calculated)1 125 dB [DLM8] Rated Power 1000 watts rms 2000 watts peak 128 dB [DLM12] Low Frequency Power Amplifier Crossover Point Rated Power 500 watts rms 1000 watts peak 1.
Line Input Power Mounting Methods US detachable line cord 100 – 120 VAC, 50 – 60 Hz, 250W EU detachable line cord 220 – 240 VAC, 50 – 60 Hz, 250W AC Connector 3-pin IEC 250 VAC Floor mount, pole mount, wall mount or fly via three integrated M10 mounting points (using M10 x 17 mm forged shoulder eyebolts). See pages 15-17 for more information.
12.1 in / 307 mm 11.9 in / 302 mm WEIGHT 22 lb 10 kg 12.3 in / 313 mm DLM8/12 Powered Loudspeakers DLM8 Loudspeaker Dimensions DLM12 Loudspeaker Dimensions 15.9 in / 403 mm 15.3 in / 389 mm 24 DLM8/12 Powered Loudspeakers 14.3 in / 363 mm WEIGHT 31 lb 14.
PA Speaker Mode – This mode is full range, but focuses on mid-range clarity where vocals often reside. DJ Speaker Mode – This mode bumps the lows and highs with a mild tuck to the mids, perfect for music playback. Soloist Speaker Mode – This mode features a low frequency roll-off to get rid of unwanted thumps and adds boost and sparkle to mid-range and high frequencies. This mode is perfect for plug-and-play singer-songwriters.
DLM8/12 Powered Loudspeakers XLR THRU RCA AUX R L XLR + TRS COMBO Ch 2 XLR + TRS COMBO Ch 1 + - 0 dB fixed gain 0 dB fixed gain XLR: 0 dB fixed gain TRS: 0 dB fixed gain (Hi Z) + - + - XLR: 0 or +30 dB TRS: 0 dB fixed gain + - CH 1 MIX Line (0 dB) Mic (+30 dB) Limit Limit ADC ADC ADC user EQ user EQ Fader Fader Fader Fader FX Effects: Reverb Delay Chorus Main Delay Feedback Fighter DSP System EQ TruSource Comp / Lim XOver Comp / Lim AMP STATUS Pwr Suply Voltag
No. Title Description Example of its use 01 Bright Room This room has a bright tone with lots of scattered reflections to simulate harder, more reflective surfaces. Useful on vocals that require a brighter reverb to cut through the mix, or for giving acoustic instruments a livelier vibe.
DLM8/12 Powered Loudspeakers Mackie Limited Warranty Please keep your sales receipt in a safe place. This Limited Product Warranty (“Product Warranty”) is provided by LOUD Technologies Inc. (“LOUD”) and is applicable to products purchased in the United States or Canada through a LOUD-authorized reseller or dealer. The Product Warranty will not extend to anyone other than the original purchaser of the product (hereinafter, “Customer,” “you” or “your”). For products purchased outside the U.S.
Owner’s Manual 16220 Wood-Red Road NE Woodinville, WA 98072 • USA Phone: 425.487.4333 Toll-free: 800.898.3211 Fax: 425.487.4337 www.mackie.
