User Manual

Master Fader and My Fader Reference Guide

• Step 2 — Return to the mixer view and select “M1” for matrix 1 from the master fader’s output

selector. Left to right, the mixer view will now show subgroups 1-6, left output, right output

and aux sends 1-14.

• Step 3 — As discussed a couple of pages back, the processing and capabilities of the matrix outputs

are almost identical to the main L/R and aux sends. Since we already discussed setting these up,

set up each matrix similarly, but this time for the lobby, mezzanine, bathrooms and backstage.

Be sure to update the name, icon and color for each matrix output.

• Step 4 — Now let’s get signal to the lobby. View the matrix 1

[lobby] mix by choosing it via the mix selector. You should

see signal coming in from the main L/R. Raise the left and right

faders (remembering that each input to a matrix is mono).

Now set the level of the matrix 1 fader to your liking. In this

example, a common way to explain the routing would be

“matrix 1 send from main L/R”. Repeat matrix 2-4 sending

each the desired mix of output signals.