User Manual

Master Fader and My Fader Reference Guide
145
Channel View
When tapped, the channel view button turns dark gray to indicate that it has been selected.
The overview and mixer view buttons will remain light gray.
The channel view handles all DSP-related activities. It is in the channel view where all plug-in processing is
adjusted on individual channel inputs and outputs. This includes input channel routing, channel EQ, channel
gate and compression, FX, output routing, graphic and parametric EQ and output compression / delay.
Current Parameter Display
Here, the current parameter display shows the current channel system name [Ch 1] – it scrolls if
the name is too long to t, displaying the entire name – followed by the custom user name [Kick],
the current parameter value [o ] and current parameter name [Fader] for just about every control
or parameter as it is adjusted. Also, if you want to type in an exact value for a parameter, touch
the channel’s parameter you would like to update so it appears in the current parameter display.
Next, tap the current parameter display; a keyboard appears. Simply type in the exact value you would
like for that channel’s parameter followed by a carriage return.
The current parameter value will always be green and the current parameter name will always
be gray. However, the color of the current channel system name and custom user name will
illuminate in the color you choose for each input and output.
Tools
The gear icon is where you access the tools view. Think of it as a “settings”-type area. But before we get
into those settings, let’s talk about one more very important thing the tools button does. Text will always
be located above the icon and it will state the current connection status of the Master Fader app.
As seen in the images below, it could state one of three statuses:
OineThe Master Fader app is NOT communicating with a mixer because it has been
congured as such. Oine could even be displayed when an iPad is physically connected
to a DL806 or DL1608.
ConnectedThe Master Fader app is connected to the mixer, either wired [DL1608 / DL1608]
or wirelessly.
DisconnectedThe Master Fader app is trying to connect wirelessly to the mixer,
but is unable to connect.
These will make more sense when we discuss devices, starting on the next page.