User Manual

Master Fader and My Fader Reference Guide
12
Check it out...youre good to go! With your assistance, the iPad found the router and dialed in the
Wi-Fi connection!
Now go back and launch the Master Fader app. It’s that easy!
Router Settings
Default router settings are typically ne, but most Wi-Fi routers may be customized to ensure high
performance and a secure network. We’ll outline some common router settings to adjust,
but since each brand is dierent, refer to its manual to learn how to adjust these settings.
(1) SSID — SSID stands for Service Set Identication. Create a name for the Wi-Fi network here.
(2) Security You will need to select a security mode and password. We suggest using
WPA [Wi-Fi Protected Access] for security purposes and a password that is easy for you to
recall, but dicult for others to hack.
This prevents strangers from joining your network and controlling the mixer,
so pick a good password!
(3) Band No, we’re not here to talk about your favorite rock band. Rather, we are here to choose
the Wi-Fi band. If you are in Wi-Fi mode 802.11n, you might be requested to choose a Wi-Fi band.
Here, we prefer and strongly suggest 5GHz. However, 2.4GHz also works.
(4) Enable Auto Channel Selection
1
Look for a setting named Auto Channel Selection” (or similar)
and enable it. The Wi-Fi channel with the least interference will be selected automatically.
This should set you up nicely with no issues at all, so feel free to exit out of settings at this point.
If you desire more information, refer to the Troubleshooting section on page 220.
1
Enable Auto Channel Selection is an advanced option that is usually automatically enabled.
If you see it, ensure that it is enabled.