User Manual
Master Fader and My Fader Reference Guide
102
Chapter 12 : Channel View : FX
Introduction
The DL 1608 and DL806 have one reverb and one delay, while the DL32R has an additional reverb,
and these may be fed from any combination of channels with dedicated FX sends. There are a wide variety
of reverb and delay
types at your disposal on the Master Fader app. As seen in the image below, the Master Fader app follows
standard FX send and return conguration so the learning curve is kept to a minimum.
The FX are essentially conjoined, reverb(s) on top, delay just below. The sends and returns for the current
channel and output are displayed here. This allows you to easily adjust the FX in one convenient location for
each selected channel; channel 1 in this example.
The Swipe Zone
Here in the FX view, swipe anywhere in the gray area outlined above. Swiping up displays that
channel’s EQ view. Swiping down displays that channel’s gate and compression view. And swiping
left and right changes channels.