14
3-3/8” 2-3/4” 1-1/2” 5/8”
Attach upper cross bar (6) to guardrail (5) using bolts(B) and washers (E).Tighten bolts (B) with wrench (J). Attach ladder rail (8) to ladder rungs (9) using bolts (C) and washers (E).Tighten bolts (C) with wrench (J).
Attach ladder rail (8) to upper cross bars (6) using bolt (D) and washer (E).Tighten bolt (D) with wrench (J). Attach ladder rail (8) to lower cross bar (7) using bolt (C) and washer (E).Tighten bolt (C) with wrench (J).
Attach guardrail (5) to post (3) using bolts (A) and washers (E).Attach crossbars (6,7) to post (3) using bolts (D) and washers (E). Attach ladder rungs (9) and crossbars (6,7) to post (1) using bolts (D) and washers (E).Tighten all bolts with wrench (J). Attach guardrail (5) to post (4) using bolts (A) and washers (E).Attach crossbars (6,7) to post (4) using bolts (D) and washers (E). Attach ladder rungs (9) and crossbars (6,7) to post (2) using bolts (D) and washers (E).Tighten all bolts with wrench (J).
14 Attach crossbars (10,14) to the assembly from Step 5 using bolts (D) and washers (E). Tighten bolts (D) with wrench (J).
14 Attach crossbars (10,14) to the assembly from Step 6 using bolts (D) and washers (E). Tighten bolts (D) with wrench (J).
14 Insert mattress support bars (13) into the provided slots of crossbars (12,14). Secure mattress support bars (13) by snapping plastic tab locks (F) into the provided slots of crossbars (12,14). Note that it may be necessary to apply more pressure to some plastic tab locks than others.
Snap plastic links (G) onto the middle of mattress support bars (13).
Attach guardrails (11) to posts (1,2,3,4) using bolts (A) and washers (E). Tighten bolts (A) with wrench (J).
12 14 Secure front guardrail (11) to crossbar (12) using bolts (B) and washers (E). Secure back guardrail (11) to crossbar (14) using bolts (B), washers (E) and, where applicable, angle brackets (H).* Tighten bolts (B) with wrench (J).
Screw bolts (D) into the bunk bed assembly. This will fill the holes that are used only with he optional accessory attachments, which are sold separately.
