User`s guide

Installing a processor-direct slot (PDS) card

1If your PDS (processor-direct slot) card has ports for connecting equipment, remove the

plastic access cover from the vertical plate.

2 Remove the PDS card from its static-proof bag.

Hold the card by its edges to avoid touching any connectors on the card.

3 Locate the slot labeled LC PDS SLOT on the logic board.

4Align the card over the processor-direct slot.

Processor-direct slotPDS access port

Vertical plate

Squeeze the two plastic tabs together and pull off the

metal retainer so the access cover can come off.

Processor-direct slot

Vertical plate

Metal retainer

Appendix B