Specifications

CHAPTER 3
I/O Features
26 Disk Drives
Figure 3-2 Maximum dimensions of the hard disk
6.40 (.252)2x
3
IDE connector Power
Mounting hole 6-32, .22"
min. full thread, 4X
A
B
A
7
101.6 (4.00)
95.25 (3.75)
3.20 (.125)
2
60.30 (2.37) 44.40 (1.75)
60.00 (2.36) 2x
101.6 (4.00) 2x
146.0 (5.75)
25.4 (1.00)
16.00 (.63) 2x
Mounting hole
6-32, through 6x
Notes:

1
2
3
4
5
6
7
8


A Defined by plane of bottom mount holes
B Defined by center line of bottom mount holes
40-pin IDE and 4-pin power connector placement must not be reversed
Dimensions are in millimeters (inches)
Drawing not to scale
Tolerances .X =
+
0.50, .XX =
+
0.25
Dimension to be measured at center line of side-mount holes
Minimum 0.5 MM clearance from any conductive PCB components to A
– –
