Specifications

Take Apart Logic Board - 25
Note: Perform the following
steps only if you are
replacing a defective logic
board.
3 Remove the two Phillips
screws that secure the
fence to the solder side of
the logic board.
4 Using a T9 torx driver,
remove the two torx
screws that secure the
logic board fence to the
SCSI connector.
5 Separate the logic board
fence from the logic
board.
Logic Board
Phillips Screw
Logic Board Fence
SCSI
Phillips
Torx Screw
Torx Screw
Connecto
r
Screw