Specifications

Troubleshooting Symptom Charts/Floppy Drive - 14
Floppy Drive
Audio and video are
present, but internal
drive does not operate
1 Reseat logic board.
2 Replace floppy drive.
3 Replace shield/wiring harness.
4 Replace logic board. Retain customer’s SIMMs or DIMMs.
Disk ejects; display
shows Macintosh icon
with blinking “X”
1 Replace disk with known-good system disk.
2 Replace floppy drive cable.
3 Replace floppy drive.
4 Replace logic board. Retain customer’s SIMMs or DIMMs.
Disk does not eject 1 Switch off system and hold down mouse button while
switching on system again.
2 Eject disk manually by pushing opened paper clip into hole
on right side of drive slot.
3 Replace floppy drive cable.
4 Replace floppy drive.