Specifications

Take Apart Shield/Wiring Harness - 40
Replacement Note: Arrange
the cables as shown before
replacing the shield/wiring
harness. When dressing the
cables, do not crimp them
between the harness and the
floor of the bottom case, or
between the harness and the
sides of the bottom case.
Route the speaker cable
between the logic board
connector and the CD-ROM
shelf. Route front panel
control, power supply, and
header cables to the side of
the front panel control bay.
Front Panel
Control Cable
6-Pin
Header-to-Power
Supply Cable
Power Supply
Cable
Floppy Drive
Cable
Video-In
Cable
Monitor-
Cable
Out
IDE Data Cable
Hard Drive
Power Cable