User`s manual

45
CPU Thermal Throttling Temp
This item allows you to activate the CPU Thermal Throttling function when the CPU
temperature is over the value which you set to low down the CPU temperature when at high
workload to protect processor from damage or accidental shutdown.
3-12 Power User Overclock Settings
Phoenix – AwardBIOS CMOS Setup Utility
Power User Overclock Settings
Item Help
*** Current Host Clock is 200 MHz ***
Host Clock at Next Boot is 200 MHz
*** Current DRAM Clock is 200 MHZ ***
DRAM Clock at Next Boot By SPD
CPU Vcore 7-Shift Default
** Advanced Controller relative items **
VIMM Select 2.65V(Default)
AGP VddQ Select 1.55V(Default)
Chipset Vcc1.55V Default
Dual 3.3V LUV Protect Enabled
VddQ LUV Protect Enabled
VDIMM LUV Protect Enabled
Menu Level >
↑↓→←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
CPU/DRAM Clock at next Boot is
This item allows you change the CPU Host /DRAM clock for overclock demand.
When the CPU Host
clock is over the CPU default value BIOS will auto disabled Bi-Turbo function
.
CPU Vcore 7-Shift
This item allows you select the CPU Vcore Voltage xx% more than the standard value, by this
function for the precise over-clocking for extra demanding of performance.
VDIMM Select
This item allows you to select 2.5V of the DDR Module. The choice are: 2.55V, 2.6V, 2.65V,
2.7V.