User`s manual

44
3-10 PC Health Status
This section shows the Status of you CPU, Fan, Warning for overall system status. This is only
available if there is Hardware Monitor onboard.
Phoenix – AwardBIOS CMOS Setup Utility
PC Health Status
Item Help
Show PC Health in Post Enabled
Current CPU Temperature 70
°
C/158
°
F
Current SYS Temperature 30
°
C/ 86
°
F
Current CPUFAN Speed 0 RPM
Current SYSFAN Speed 4687 RPM
Current SYSFAN1 Speed 0 RPM
Vcore 1.35V
VDIMM 2.54V
VCC3.3 3.20V
+5V 5.16V
+12V 12.04V
3.3VSB(V) 3.19V
VBAT 1.89V
5VSB(V) 5.27V
Menu Level >
↑↓→←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Show PC Health in Post
During Enabled, it displays information list below. The choice is either Enabled or Disabled.
Current CPU Temperature/Current System Temperature/Current FAN1, FAN2 Speed/
Vcore/3.3V/+5V/+12V/-12V/VBAT(V)/5VSB(V)
This will show the CPU/FAN/System voltage chart and FAN Speed.
3-11 Bi-Turbo Configuration
Phoenix – AwardBIOS CMOS Setup Utility
BiTurbo Configurations
Item Help
CPU Thermal-Throttling Disabled
x CPU Thermal-Throttling Temp 70
x CPU Thermal-Throttling Duty 50.00%
x CPU Thermal-Throttling Beep Enabled
Menu Level >
↑↓→←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults