User`s manual

Note: The black pin and white prong will only “snap” on in one orientation

− Check to ensure the black pin is rotated properly for installation with the slot perpendicular to the

heatsink

2-4 To install the system memory

This motherboard provides four 184-pin DDR DUAL INLINE MEMORY MODULES (DIMM)

sites for DDR memory expansion available from minimum memory size of 128MB to maximum

memory size of 4.0GB DDR SDRAM.

Valid Memory Configurations

Bank 184-Pin DIMM PCS Total Memory

Bank 0, 1 (DIMM1) DDRDDR266/DDR333/DDR400

DDR SDRAM Module

128MB

∼

1.0GB

Bank 2, 3 (DIMM2) DDRDDR266/DDR333/DDR400

DDR SDRAM Module

128MB

∼

1.0GB

Bank 4, 5 (DIMM3) DDRDDR266/DDR333/DDR400

DDR SDRAM Module

128MB

∼

1.0GB

Bank 6,7 (DIMM4) DDRDDR266/DDR333/DDR400

DDR SDRAM Module

128MB

∼

1.0GB

Total System Memory (Max. 4.0GB) 4

128MB

∼

4.0GB

For Dual channel Limited!

Dual channel function only supports when 2 DIMM Modules plug in either both DIMM1 &

DIMM3 or DIMM2 &DIMM4, or four DIMM Modules plug in DIMM1~DIMM4.

DIMM1 & DIMM3, or DIMM2 & DIMM4 must be the same type, same size, same frequency

for dual channel function.

Generally, installing DDR SDRAM modules to your motherboard is very easy, you can refer to

figure 2-4 to see what a 184-Pin DDR266/DDR333/DDR400 DDR SDRAM module looks like.

Click