Technical data

15
• Cleaning is extremely important for proper operation of the appliance. We recommend
cleaning at the end of each work cycle. Turn off the 0-I switch, wash all the removable parts
in running water and replace them with care.
WARNING : Before removing the filters (S) clean residual foreign matter from the bottom of
the tub.
N.B. : Turn off the master switch (A) before cleaning the outer coating, without using direct or
high pressure water jets. Wash all parts of the appliance with neutral detergents (not
corrosive or aggressive).
Fig. 3-5
Fig. 3-6
3.2 CLEANING