Hardware manual

3-14 Agilent 7500 Series ICP-MS Hardware Manual
3 Startup, Shutdown and Status
The Carrier Gas Flow meter box appears. An acceptable range of values for
this meter is application specific.
4 Repeat Step 3 until you have checked all 14 system components on the
Instrument Control screen.
Checking the Meter Control Panel
MassHunter Workstation (or ChemStation) also provides a Meter Control
Panel for checking the instrument’s status. Selected parameters appear on the
screen in the meter boxes that provide real- time operating values for the
Agilent 7500 components. The Meter Control Panel enables you to monitor
more components than you can access from the Instrument Control window.
Also the meters remain on the screen until you choose to remove them or close
the Instrument Control window.
To monitor the Agilent 7500 internal and external environments, complete the
following steps:
1 Select Instrument>>Instrument Control.
The Instrument Control screen appears (Figure 21).
NOTE
Up to five meter boxes can be displayed at one time. If you select a sixth meter to monitor,
you must deselect one that is already displayed.