Hardware manual

Startup, Shutdown and Status 3
Agilent 7500 Series ICP-MS Hardware Manual 3-5
8 Select Instrument>>Instrument Control.
The Instrument Control window (Figure 17) appears. The title bar shows
that the instrument is in Shutdown mode. The LED located on the top right
corner of the right top cover is off during Shutdown mode. Continue with
“Starting from Shutdown Mode”.
Figure 17 Instrument Control Window in Shutdown Mode
(Picture may differ depending on ICP-MS Model/Mode)
Starting from Shutdown Mode
The following instructions assume that the instrument is turned on and the
Instrument Control window is displayed. See “Starting the Instrument from
Cold” to perform the necessary tasks. Then, complete the following steps:
1 Select Vacuum>>Vacuum On.
A dialog box appears, asking if you want to turn the vacuum on.
Figure 18