Hardware manual

Contents
Agilent 7500 Series ICP-MS Hardware Manual C-5
Replacing or Refitting the Concentric Nebulizer and the End
Cap 4-43
Cleaning the PFA Concentric Nebulizer 4-44
Removing the PFA Concentric Nebulizer 4-46
Installing the PFA Concentric Nebulizer 4-46
Cleaning the Spray Chamber and the Transfer Line 4-47
Cleaning the End Cap 4-48
Replacing or Refitting the Nebulizer and Spray
Chamber 4-49
Testing the Nebulizer and Spray Chamber 4-50
Maintaining the Torch 4-51
Locating Tools and Supplies 4-51
Removing and Checking the Torch 4-52
Cleaning the Torch 4-55
Refitting the Torch 4-56
Tes tin g th e Tor c h 4-58
Adjusting the Position of the Work Coil 4-58
Cleaning the RF Return strip and Torch Box Area 4-58
Maintaining the ShieldTorch 4-59
Locating Tools and Supplies 4-59
Removing the ShieldTorch 4-60
Cleaning the Torch 4-62
Assembling the Torch, Shield Plate, and Bonnet 4-63
Clean the Ignition Terminal and Shield Contact Area 4-64
Installing the ShieldTorch System 4-64
Maintaining the Cones 4-66
Locating Tools and Supplies 4-66
Removing the Cones 4-67
Cleaning the Cones 4-70
Check the Orifice 4-72
Refitting the Cones 4-72
Testing the Cones 4-74
Maintaining the Lenses (Agilent 7500a) 4-75