Hardware manual

Contents
Agilent 7500 Series ICP-MS Hardware Manual C-3
Product and environmental safety - toxic materials 2-12
Moving the Agilent 7500 ICP-MS 2-13
Environmental Conditions and Utility Requirements 2-13
Temperature and Humidity Ranges 2-13
Electromagnetic Compatibility 2-14
ICES/NMB-001 2-15
Electrical Power (Voltage, Frequency, Amperage,
Phase) 2-15
Argon Gas Supply 2-15
Reaction Gas Supply (Agilent 7500cs, 7500cx) 2-15
Cooling Water 2-15
Exhaust Duct 2-15
Symbols Used on the Instrument 2-16
Others 2-17
Part Numbers 2-17
Serial Number 2-17
3 Startup, Shutdown and Status 3-1
Starting the Instrument 3-2
Starting the Instrument from Cold 3-2
Starting from Shutdown Mode 3-5
Starting from Standby Mode 3-7
Shutting Down the Instrument 3-10
Putting the Instrument in Standby Mode 3-10
Putting the Instrument in Shutdown Mode 3-11
Turning the Instrument Completely Off 3-12
Checking the Instrument Status 3-13
Checking the Instrument Control Diagram 3-13
Checking the Meter Control Panel 3-14
Typical Meter Values for the Vacuum System 3-18
4Maintenance4-1
Maintenance 4-2