Hardware manual

Appendix
Agilent 7500 Series ICP-MS Hardware Manual A-5
Replacing the torch and connector
1 Locate and open the torch box.
2 Remove the existing torch and connector.
3 Install the Connectors for Optional Gas Introduction and 1.5mm (or
1mm) I.D. Torch.
4 Insert the Inner Sleeve into the Option gas Line and connect the option
gas line to the Connectors for Optional Gas Introduction using the L type
Teflon connector.
Inner SleeveTeflon Tubing
CAUTION
Connect the Teflon tubing to the connector securely.