Hardware manual

Technical Information 6
Agilent 7500 Series ICP-MS Hardware Manual 6-23
APG remote interface
The following functions are available on the Agilent 7500 MassHunter
Workstation (or ChemStation) APG remote interface.
• Inform the current instrument mode (Standby or Analysis mode)
• Setting the instrument to the Standby mode
• Starting data acquisition
Figure 137 APG Remote Connector
Tabl e 11 Remote Signals
Pin Signal Active
1 Digital ground
2N/A
3 Start Low
4 Shutdown Low
5N/A
6N/A
7N/A
8N/A
9N/A