Hardware manual

Overview 1
Agilent 7500 Series ICP-MS Hardware Manual 1-7
Cooling Water Inlet/Outlet Cooling water inlet and outlet port
Argon Gas Inlet Argon gas inlet port
Optional Gas Inlet Optional gas inlet port
Helium Gas Inlet Helium gas inlet port for Agilent 7500cs, 7500cx
Hydrogen Gas Inlet Hydrogen gas inlet port for Agilent 7500cs. Optional for 7500cx.
Main Power Supply Cable Power cable
Main Power Breaker The main power supply circuit breaker.
Generally, this breaker remains ON, and the power switch (front side
of the instrument) is used for power ON/OFF.
Power Supply connection
for the Rotary Pumps
Power connections for the rotary pump(s).
Power Switch for Rotary
Pumps
The rotary pumps instrument circuit breaker.
Generally, these switches are kept ON because MassHunter
Workstation (or ChemStation) controls the rotary pump power
ON/OFF.
Vacuum Hose Connection
from Rotary Pump
Connection for the rotary pump(s) vacuum hose.
Connection of Rotary Pump
Exhaust Hose
Connection for the rotary pump(s) exhaust hose.
Ethernet or GPIB Interface The connection port for the Ethernet Cable.
The Ethernet cable is connected between the Agilent 7500 and the
PC.
Remote Port The Connection port for the APG Remote cable.