Hardware manual

1-4 Agilent 7500 Series ICP-MS Hardware Manual
1Overview
Agilent 7500 – Part Names
The names of the parts of the Agilent 7500 are described in this section.
Front View
Figure 1 Agilent 7500 (Front View)
Hood (left)
Exhaust Duct
Protective Tinted
Window
Hood (right)
Plasma Off Switch
(Shutdown Switch
on the reverse side)
LED
Power Switch
Peristaltic Pump
Drain Tray
Drain Tray Port
Hood (Left) This hood is used to cover the torch and interface area during operation.
Hood (Right) This hood is used to cover the ion lens system, the mass filter and the detector
areas.
Protective
Tinted Window
This window is used as a viewing glass to observe the plasma.
LED The LED indicates the instrument status by changing colors or blinking.
Green: Analysis mode
Orange: Standby mode
Red: Error
Orange blinking: Mode transition
Turn off: Shutdown mode