Hardware manual

4-134 Agilent 7500 Series ICP-MS Hardware Manual
4Maintenance
2 Confirm the Detector Type.
This dialog box shows the type of Detector. There are two types of detector,
5184- 1983 (ETP AF222) / G1833- 65420 (ETP AF220) and G1833- 65575
(HPK). In this block, click Change after installation and select the detector
you have installed.
Figure 109 Hardware Settings dialog box
3 If the right detector is not shown in this dialog box, click Change button.
The Change Detector Type dialog box appears.
Figure 110 Change Detector Type dialog box
4 Select the right detector from this dialog box and click OK.