Hardware manual

Maintenance 4
Agilent 7500 Series ICP-MS Hardware Manual 4-117
Figure 93 Reaction cell assembly
4 Place the cell upper block on the cell lower block.
Confirm that the cell upper block is covering the Octopole assembly and is
correctly installed over the cell lower block.
5 Tighten the cell assembly screws.
Tighten the 4 cell assembly screws from the bottom side of the cell lower
block. (Refer to Figure 94)
Octopole Holder Contour
Octopole Assembly
Octpole Shaft
Cell Lower Block
A-A' Profile