Hardware manual

4-108 Agilent 7500 Series ICP-MS Hardware Manual
4Maintenance
7 Secure the Octopole plate.
Secure the Octopole plate to the location from which you removed the Cell
Exit Lens and QP Focus. Remove the two plate bias relay screws from the
Cell Exit Lens.
Figure 89 The Octopole with the Cell Entrance Lens and Cell Exit Lens Removed
8 Remove the 2 plate bias relay screws from the cell exit lens.
Cell Exit Lens
Spacer (Exit Side)
QP Focus
Octopole Plate
Cell Entrance Lens
Spacer (Entrance Side)
Cell Focus