Hardware manual

4-98 Agilent 7500 Series ICP-MS Hardware Manual
4Maintenance
The following procedure describes how to remove the Extraction Lens- Omega
Lens assembly:
1 Locate the Extraction Lens- Omega Lens assembly.
The Extraction Lens- Omega Lens assembly is located behind the skimmer
cone (refer to Figure 78 for the 7500cx and Figure 79 for the 7500cs).
Figure 78 Sampling Cone, Skimmer Cone and Extraction Lens-Omega Lens Assembly (7500cx)
Sampling Cone
Extraction Lens-Omega
Lens Assembly
O-ring
Skimmer Cone
Skimmer Base
Extraction Lens 1
Extraction Lens 2
Omega Lens-ce
Omega Bias Lens-ce